Hi I just joined here and need some advice on my quaterpipe I have had for around 3 years now. When I stopped skating a year ago I did not cover it and it got in a bad shape. The beginning of the ramp is chipped this is what it looks like.

http://img183.imageshack.us/img183/2338/ramp1li5.jpg

I would have used the insert image function but it would not display the image from imageshack even using a direct url and a forum link but no luck please tell me what I can do to repair this ramp any tools or filling that can be used. I was also thinking about making the qauterpipe smaller by taking off around a quater of it. This is just mainly because it is in my backgarden and the run up is horrible plus it would just be lot more fun if it was smaller.


Your advice would be appreciated ty

just get a piece of hard-material, and electrical tape it to the floor and the bottom of the ramp.
that'd work well enough.

Take the ply off the riding surface and replace it, shouldnt take longer than 10 minutes and i cant imagine it costing over £5

yeh take of the top layer or add a sheet of metal to the bottom to make the run up smooth